Worked
We added this in Utah where the humidity is very low. Cured very quickly!
Durabak liquid accelerator can be used to reduce the drying/curing time by up to 50%, depending on the climactic conditions. This may be helpful in areas of low atmospheric moisture, or when shorter curing/drying times are required. The accelerator comes in pre-measured packets or cans; one for quarts and one for gallons.
Quart: Select this size if you are using quart cans of Durabak.
Gallon: Select this size if you are using gallon cans of Durabak.
DIRECTIONS
• Contents of accelerator should be added to the DURABAK™ can upon opening,
at the ratio of one quart-packet or can per quart, or one gallon-packet or can per
gallon.
• The mixture should be stirred thoroughly to assure complete blending, then applied
as per DURABAK™ regular instructions.
• Accelerator will not affect product performance. It only speeds drying and
curing time.
Weight 1 lbs
Dimensions 7 × 5 × 5 in
Use with Gallon, Quart
Use UV, Non-UV
We added this in Utah where the humidity is very low. Cured very quickly!
I live in a very dry climate so I purchased the accelerator and added it to the Marine Liner as directed. However, this made the Liner very thick and hard to work with. I skipped the accelerator on the second coat and had much better luck. The second coat did stay sticky for a while but eventrually hardened-up nicely.